NR_Organic Jewelry Designs

[nacho_riesco]

More renders

Attachments

[Geert_Etcher_Melis]

Beautiful piece! Also love the Baselworld piece small_orange_diamondsmall_orange_diamondsmall_orange_diamondsmall_orange_diamondsmall_orange_diamond

[nacho_riesco]

Hey Etcher! Thank you!

[nacho_riesco]

Stunning 3d printing by Micron3D (http://www.micron3d.com/) , printer used: Solus 3D

Attachments

[nacho_riesco]

Hello! Last week I was at the Alphonse Mucha exhibition in Madrid and I loved it’. I saw a pencil sketch and I thought to to make this design. Fully made within Zbrush with measurements control
I hope you like it

Attachments

[Phil_China]

Excellent work!

[nacho_riesco]

Thanks Phil!

[nacho_riesco]

Hi everyone! Have just lanched a new Pack of 10 high quality tileable Alpha Maps (1024x1024)*of different scales designs, hope you like it!
You can get them here:
Gumroad: https://gum.co/UELKO
Cubebrush: http://cbr.sh/0txjcu

Attachments

[nacho_riesco]

Hi all! This August I will attend as a guest lecturer at the Evotech’s 2018 Jewellry Tech Symposium at Sidney.

In previous years, were held Master Class which primarily catered for Matrix users from around Australia, New Zealand and surrounding countries coinciding with the International Jewellery Fair held in Sydney.

This time, some new guest lecturers are included, not only from Gemvision, to discussing other topics in detail as the application of Zbrush on jewelry design, along with demonstrations of Gemvision software solutions, 3D Printing discussions and demonstrations from Asiga and other technology companies who specialise within the jewellery industry.

Check it out and buy your ticketts!

https://evotechpacific.com.au/symposium/?wmc-currency=USD

[nacho_riesco]

Hi all!

This is a revision of an old design which I decided to cast again with some tweaks an adding more details.

You can see the whole process, from Zbrush to final product.

Attachments

[nacho_riesco]

Hi! Finally I have the chance of publish this amazing project . They are a serie of jewelry pieces based on the stunning art of Michael Parkes, licensing under his brand.
I’m always been a big fan of his job and having the honor of translate his sculptures into wearable jewelry designs has been a huge responsability and a blast at same time, but getting a great satisfaction with his supervision and approval.

This is the Angel of August based on the following sculpture: https://www.theworldofmichaelparkes.com/artists/michael-parkes/angel-august

Attached you can see pictures from the 3d printing and the real piece, It was big challenging project to cast the necessary details, all made with the best available technology and craftmanship team

Attachments

[nacho_riesco]

Finally I have the chance of publish this amazing project smiley . They are a serie of jewelry pieces based on the stunning art of Michael Parkes, licensing under his brand
I’m always been a big fan of his job and having the honor of translate his sculptures into wearable jewelry designs has been a huge responsability and a blast at same time, but getting a great satisfaction with his supervision and approval.

This is the Moonstruck, based on the following sculpture: https://www.theworldofmichaelparkes.com/artists/michael-parkes/moonstruck-3

Attached you can see pictures from the real piece, It was big challenging project to cast the necessary details, al made with the best available technology and craftmanship team

Attachments

[AnthonyA85]

This is amazing work, loving all the detail here. Never heard of micron3d before, i’ll have to give them a look, though i have used shapeways before to have a couple of simple jewelry pieces printed for my girlfriend, neither is as finely detailed as your work. I’ve been thinking about getting into 3d printing and possibly jewelry making myself, though i wouldn’t really know where to begin.

I’ll definitely be keeping track of this thread.

[nacho_riesco]

Thanks Anthony for your answer, micron3d is just a 3d printing supplier in Spain there are many 3d printing solutions which can be applied to jewelry, everything is related of kind of designs you want to produce, as more fussy you are, price will raise up also way of manufacturing will count, in this case 3d printing material will be very important.

[nacho_riesco]

Hi all!, this is a design that I have recovered from the Zbrush 2018 beta testings, I left it incomplete during an Sculptris Pro try, and now I’ve decided to give it a new opportunity, hope you like it!

Attachments

[boozy_floozie]

Something big about your small.
Often when I look at your work I imagine it carved on buildings or in churches.

[nacho_riesco]

Thanks boozy floozie for you comment, curious way of look a my work, sure, jewelry has inspiration from architecture

[nacho_riesco]

Some closeup renders

Attachments

[nacho_riesco]

New render, this time silver and turmalinated quartz

Attachments

[Ava_Mohammadi]

hi nacho I really like your works,they are so inspiring and beaytiful, I try to build them as my home work in zbrush so maybe one day I can be a good designer, can you tell me some detail about your tiger?how you made it?