More …
Getting Started with Sculptris Pro
This 3 part Workshop hosted by Paul Gaboury will get you up and running on everything Sculptris Pro, from UI and usage, customization, and combining it with other ZBrush features.
Getting Started with...Using Tessimate
Learn to manipulate topology to your needs with the Tessimate feature. Your host Paul will show multiple examples of how to use this powerful feature with the addition of explaining the difference between Tessimate and Decimate.
Using TessimateThe Basics of PolyGroupIt
In this 2 part Workshop, Paul Gaboury will give you a full run down of how to use PolyGroupIt, then in part 2 we'll show you how PolyPaint and PolyGroupIt can be utilized together.
The Basics of...Using Elastic & Liquid Curve Mode
This Lesson will show multiple Curve Mode examples including IMM Curves, the elastic option, the liquid option, Lock Start, Lock End, Rotate Curve, and Smooth Curve. Now let's go make some Curves!
Using Elastic &...Discovering Groups by Normals
Creating PolyGroups can be very useful when modeling and or sculpting in ZBrush. In this Lesson, we'll demonstrate how to create new PolyGroups on a hard surface model using it's normals and edge degrees.
Discovering Groups by...Deformers
A Workshop focused on the powerful wide spectrum of ZBrush's Deformers. Buckle in as your host Solomon Blair takes you through each Deformer and their abilities.
Deformers
:D ;) :confused: :evil: :cry: :idea: :lol: :rolleyes:

Highlighted Forums

  1. Forum Actions:

    Forum Statistics:

    • Threads: 23
    • Posts: 306
  2. toprow threads with more than half a million views

    Forum Actions:

    Forum Statistics:

    • Threads: 31
    • Posts: 23,707
+ Create New Thread + Reply to My Thread
1 Week Ago

3

2

0

thread gallery
257 Favorites and 159Followers.

1 Week Ago

7

1

0

thread gallery
257 Favorites and 159Followers.
Little Frog
Hi all! This is an sculpting practice I made based from a picture I found on the net. I think that beauty is on the simple things, nice shapes which transmits feelings without thousands of details I used the mug provided on the 3D Printing Projects folder Rendered with Keyshot, without any Polypainting, frog material was setted using the Material Graph utility. Hope you like it!

4 Weeks Ago

3

1

0

thread gallery
257 Favorites and 159Followers.
Merry Xmas to everyone!

11-04-18

1

0

thread gallery
257 Favorites and 159Followers.
New closeup render

11-04-18

1

0

thread gallery
257 Favorites and 159Followers.
Group of Keyshot materials I created to achieve the Chichoni effect

11-01-18

3

1

1

thread gallery
257 Favorites and 159Followers.
Some in progress images

10-31-18

3

1

0

thread gallery
257 Favorites and 159Followers.
some closeups

10-31-18

6

1

0

thread gallery
257 Favorites and 159Followers.
Chichoni Tribute
Hi all! This is a tribute of one of my favourites illustrators, Oscar Chichoni. I started this project as sculpting practice choosing the angel as reference from one o his illustrations ( https://i.postimg.cc/SNLSMzpn/b8608ea1579dcb2eb3824bd7d37cb7a7.jpg ) and finally decided to sculpt the whole scene even with the challenge of imitate his amazing metal textures. And this is what came out, I'm happy with the overall finishing, haven't tried to make an exact replica of the original image so there could be many things to improve and fix but I've ejoyed a lot sculpting and rendering it, that was the original idea Base rendering was made with Keyshot, I didn't use any UV mapping, all materials wer tweaked using the material graph using many textures, materials and labels and exporting different render passes. The final image was composed in Ps adding some effects as smoke and lights, and the necessary color tweaks and shadows/lights balancing. Here you can see it at better resolution and more images: https://www.artstation.com/artwork/rRRo2J Hope you like it!

10-18-18

0

0

thread gallery
257 Favorites and 159Followers.
New render, this time silver and turmalinated quartz

10-16-18

3

1

0

thread gallery
257 Favorites and 159Followers.
Some closeup renders

10-15-18

6

3

0

thread gallery
257 Favorites and 159Followers.
Hi all!, this is a design that I have recovered from the Zbrush 2018 beta testings, I left it incomplete during an Sculptris Pro try, and now I've decided to give it a new opportunity, hope you like it!

  • boozy floozie
    10-15-18
    Something big about your small. Often when I look at your work I imagine it carved on buildings or in churches.
  • nacho riesco
    10-16-18
    Thanks boozy floozie for you comment, curious way of look a my work, sure, jewelry has inspiration from architecture
10-10-18

6

3

1

thread gallery
257 Favorites and 159Followers.
Finally I have the chance of publish this amazing project smiley . They are a serie of jewelry pieces based on the stunning art of Michael Parkes, licensing under his brand I'm always been a big fan of his job and having the honor of translate his sculptures into wearable jewelry designs has been a huge responsability and a blast at same time, but getting a great satisfaction with his supervision and approval. This is the Moonstruck, based on the following sculpture: https://www.theworldofmichaelparkes.com/artists/michael-parkes/moonstruck-3 Attached you can see pictures from the real piece, It was big challenging project to cast the necessary details, al made with the best available technology and craftmanship team

  • AnthonyA85
    10-12-18
    This is amazing work, loving all the detail here. Never heard of micron3d before, i'll have to give them a look, though i have used shapeways before to have a couple of simple jewelry pieces printed for my girlfriend, neither is as finely detailed as your...
  • nacho riesco
    10-13-18
    Thanks Anthony for your answer, micron3d is just a 3d printing supplier in Spain there are many 3d printing solutions which can be applied to jewelry, everything is related of kind of designs you want to produce, as more fussy you are, price will raise up...
10-10-18

7

1

1

thread gallery
257 Favorites and 159Followers.
Hi! Finally I have the chance of publish this amazing project . They are a serie of jewelry pieces based on the stunning art of Michael Parkes, licensing under his brand. I'm always been a big fan of his job and having the honor of translate his sculptures into wearable jewelry designs has been a huge responsability and a blast at same time, but getting a great satisfaction with his supervision and approval. This is the Angel of August based on the following sculpture: https://www.theworldofmichaelparkes.com/artists/michael-parkes/angel-august Attached you can see pictures from the 3d printing and the real piece, It was big challenging project to cast the necessary details, all made with the best available technology and craftmanship team

10-03-18

2

1

0

thread gallery
257 Favorites and 159Followers.
Hi! this is I new Keyshot render of the Uncle Creepy sculpting I did some months ago, you can see more images here https://www.artstation.com/artwork/JNeK0

09-12-18

10

1

1

thread gallery
257 Favorites and 159Followers.
Hi all! This is a revision of an old design which I decided to cast again with some tweaks an adding more details. You can see the whole process, from Zbrush to final product.

07-11-18

1

1

thread gallery
257 Favorites and 159Followers.
Hi all! This August I will attend as a guest lecturer at the Evotech's 2018 Jewellry Tech Symposium at Sidney. In previous years, were held Master Class which primarily catered for Matrix users from around Australia, New Zealand and surrounding countries coinciding with the International Jewellery Fair held in Sydney. This time, some new guest lecturers are included, not only from Gemvision, to discussing other topics in detail as the application of Zbrush on jewelry design, along with demonstrations of Gemvision software solutions, 3D Printing discussions and demonstrations from Asiga and other technology companies who specialise within the jewellery industry. Check it out and buy your ticketts! https://evotechpacific.com.au/symposium/?wmc-currency=USD

05-13-18

3

3

1

thread gallery
257 Favorites and 159Followers.
Hi all! Recently decided to print my Art Decó Panther I sculpted during the Beta of Zbrush 2018, and thought that the Form2 would be a great choice to print a big piece. Results looks really nice! it is around 16 cm high Printing was mde by my mate of Dutch Inovision Group from the Netherlands http://dutchinnovisiongroup.com/ Will post images from the finished model soon

04-19-18

3

1

thread gallery
257 Favorites and 159Followers.
Moebius Fan Art
Moebius fan art More images here: https://www.artstation.com/artwork/RoZAA

04-12-18

1

0

thread gallery
257 Favorites and 159Followers.

04-09-18

7

1

thread gallery
257 Favorites and 159Followers.
And the Keyshot render

  • boozy floozie
    04-11-18
    That's fabulous, hehe what a face Lovin' those reliefed textures too.
  • nacho riesco
    04-12-18
    Thank you boozy floozie! hehe yes! I felt in love with that expresión
04-09-18

3

1

0

thread gallery
257 Favorites and 159Followers.
More renders...

04-09-18

1

1

thread gallery
257 Favorites and 159Followers.
Uncle Creepy
Hi all! this is a fant art of Frank Frazetta "Uncle Creepy Portrait" I saw it and I couldn't resist to sclupt it with using Sculptris Pro Hope you like it!

03-28-18

2

7

1

thread gallery
257 Favorites and 159Followers.

  • boozy floozie
    03-29-18
    These are lovely Nacho - such a great sense of design and balance running throughout all the posts
  • nacho riesco
    03-29-18
    Thanks boozy loozie! Have liked your comment a lot, as much as I like your creations, love your unique style, yo're doing a great job
03-28-18

2

1

thread gallery
257 Favorites and 159Followers.
Art Decó Style pather using the new Sculptris Pro features

  • gabo1991
    03-28-18
    Love this piece and the other sculpts you did during beta testing. Thank you for posting.
03-28-18

1

2

thread gallery
257 Favorites and 159Followers.
And Finally my entry on the Sculptris Pro Sphere Chalenge

03-28-18

3

1

2

thread gallery
257 Favorites and 159Followers.
Progress of Primitive Projections workflow

03-28-18

1

0

thread gallery
257 Favorites and 159Followers.
Little owl with Primitive Projection

03-28-18

1

0

thread gallery
257 Favorites and 159Followers.
New Curve Elastic test and Snake Hook Brushes

03-28-18

1

0

thread gallery
257 Favorites and 159Followers.
A bit o fun with the Primitive Projections, Indian Totem

03-28-18

1

3

thread gallery
257 Favorites and 159Followers.
Hi all! Proud to have been part of the Zbrush 2018 beta testers group, big Thanks to Pixologic for count on me and thanks to all artists which shared their amazing creations, feedback, knowledge and skills, you guys rock! Here are all tests I made during the testing, hope you like them!