More …
Getting Started with Sculptris Pro
This 3 part Workshop hosted by Paul Gaboury will get you up and running on everything Sculptris Pro, from UI and usage, customization, and combining it with other ZBrush features.
Getting Started with...Using Tessimate
Learn to manipulate topology to your needs with the Tessimate feature. Your host Paul will show multiple examples of how to use this powerful feature with the addition of explaining the difference between Tessimate and Decimate.
Using TessimateThe Basics of PolyGroupIt
In this 2 part Workshop, Paul Gaboury will give you a full run down of how to use PolyGroupIt, then in part 2 we'll show you how PolyPaint and PolyGroupIt can be utilized together.
The Basics of...Using Elastic & Liquid Curve Mode
This Lesson will show multiple Curve Mode examples including IMM Curves, the elastic option, the liquid option, Lock Start, Lock End, Rotate Curve, and Smooth Curve. Now let's go make some Curves!
Using Elastic &...Discovering Groups by Normals
Creating PolyGroups can be very useful when modeling and or sculpting in ZBrush. In this Lesson, we'll demonstrate how to create new PolyGroups on a hard surface model using it's normals and edge degrees.
Discovering Groups by...Deformers
A Workshop focused on the powerful wide spectrum of ZBrush's Deformers. Buckle in as your host Solomon Blair takes you through each Deformer and their abilities.
Deformers
:D ;) :confused: :evil: :cry: :idea: :lol: :rolleyes:

Highlighted Forums

  1. toprow threads with more than half a million views

    Forum Actions:

    Forum Statistics:

    • Threads: 30
    • Posts: 23,065

Highlighted Threads

ZBrush 2018.1 Now Available by: aurick 4 Days Ago
Views: 24725 Replies: 5
#AskZBrush: Updated April 23 by: aurick 1 Week Ago
Views: 265966 Replies: 96
Insert Multi Mesh Repository by: aurick 3 Weeks Ago
Views: 2404902 Replies: 612
Sculptris Pro in Action with Pablo Munoz Gomez by: aurick 05-14-18
Views: 17131 Replies: 23
ZBrush Summit 2018 by: aurick 02-12-18
Views: 9603 Replies: 0
Annual ZBrush Awards by: aurick 02-06-18
Views: 1888 Replies: 0
+ Create New Thread + Reply to My Thread
1 Week Ago

15

3

0

thread gallery
16 Favorites and 12Followers.
Aaand they're done It's a unit of 5 men with 5-6 weapon options each. So there is 27 uniqe options of them. Obviously that's a bit much to render (not to mention uploading them to zbrush central haha), so I just picked my favourite mele option for each pose, another one with a bow, and finally I made a render with all options for each pose, and that's what you can see here, 3 renders for each pose More (and better quality) here: https://www.artstation.com/artwork/e23PZ

  • nebular
    1 Week Ago
    Very well made - poses are so dynamic - you can feel weight and action there. Great job mate.
  • Nemesis
    1 Week Ago
    Thanks dude! Thank you
1 Week Ago

1

0

thread gallery
16 Favorites and 12Followers.
And here are all the weapon options I mentioned:

2 Weeks Ago

1

0

thread gallery
16 Favorites and 12Followers.
Thanks Astjid For all the rest: Check out something I've been working on recently! It's just a teaser of the 5 Norse man unit, each of them has 5-6 weapon options, renders should be ready within a week Cheers guys!

04-15-18

2

0

thread gallery
16 Favorites and 12Followers.
One more wolf https://www.artstation.com/artwork/10lvX

  • Astjid
    04-17-18
    Really nice work : )
04-14-18

3

1

1

thread gallery
16 Favorites and 12Followers.
Another miniature for Mierce Miniatures' Darklands: Hror Artstation link: https://www.artstation.com/artwork/Ad6oX

03-23-18

6

1

0

thread gallery
16 Favorites and 12Followers.
Some 3D printing today https://www.artstation.com/artwork/kvanl Approaching platinum trophy for Skyrim VR, so I decided it's about time I made some fanart of it. For that purpose I chose my favourite loading screen with Giant deep in his thoughts. Sculpted entirely in Zbrush, rendered in Zbrush and Keyshot, printed on my Wanhao D7 with Monocure resin. For the 3D printing nerds: burn in 5x120sx50um, rest 10s 35um. Hope you guys like it and if you have any feedback or questions feel free to comment Cheers!

01-25-18

12

1

2

thread gallery
16 Favorites and 12Followers.
Thanks guys for all the feedback! Another batch of models! Not all could fit here, so if you like them feel free to check out rest of them in higher quality at https://www.artstation.com/artwork/531E1 or all my works at https://www.artstation.com/bob Enjoy!

12-15-17

9

5

1

thread gallery
16 Favorites and 12Followers.
Hi! Thanks for the reply! I didn't even relise that I was in a top row That's awesome! As for the scale, obviously each is a bit different, and I'm not sure which one you ask about, but all humans are around 35mm to top of their heads. Those birds are on the 30mm bases, and height depends on the rods you use to make them fly. As for the giant skeleton in TR, he has his little 35mm transparent friends for the scale on the first render And a little something extra, some new minis I sculpted recently (more shots: https://www.artstation.com/artwork/DqR2n )

  • fiaz shaikh
    12-15-17
    Wow I can see lot of hard work going into that !!!
  • momentum
    12-17-17
    This is mad! Nice work
12-11-17

10

2

2

thread gallery
16 Favorites and 12Followers.
Wow, havent't really updated this thread in a long time, have I? Anyway, here's some of my recent works, more on https://www.artstation.com/bob Any feedback is of course welcomed!

  • SoDakZBrusher
    12-14-17
    Fantastic sculpts, as usual. Well deserved TR! May I ask what is the height that these will be printed?
06-12-17

7

1

2

thread gallery
16 Favorites and 12Followers.
Thanks! New batch of renders, houpe you lie it guys

05-31-17

10

2

1

thread gallery
16 Favorites and 12Followers.
Learning keyshot LOAD - Ylva, Vi Letalis, Blip and Blaine Hi res: https://www.artstation.com/artwork/OZalK

  • Rogan
    05-31-17
    Mind blowing stuff. Love it!
05-08-16

7

1

1

thread gallery
16 Favorites and 12Followers.
Another sculpts 32mm scale as always, ment for 3D printing for more minis and renders (I can only post few in one post here) please visit my artstation: https://www.artstation.com/artist/bob c&c always welcome! enjoy

03-07-16

8

1

1

thread gallery
16 Favorites and 12Followers.
Hi guys! Today I want to show you the most complex multi part kit I ever worked on, 20 switchable rotationable arms, 3 heads types, 5 body types, and it's all compatible. I'm amazed it actually works I made some renders for you guys, but obviously it's only few of countles possibilities. Basic T-pose was created by Irek Zieliński; I worked on equipment, posing, alternative heads, capt's armor, and of course all that boring cutting Hope you like it guys!

02-26-16

7

1

1

thread gallery
16 Favorites and 12Followers.
thank you guys for warm welcome @ejas: yeah, and what I forgot to mention: cutting for casting purposes is insanely better, with traditional there was always something broken, not to mention way to wide gaps between parts. @Totyo: I have bunch of models lying around on my desk, I don't have any good quality camera here, but I will certainly upload them some day. For now I only can give you few customers that uploaded their photos, mainly on facebook. Here you go: Jezebel: http://www.beastsofwar.com/paranoid-miniatures/dawn-unveils-finished-jezebel-miniature/ Shiver and Carrien (guys on the right, I havent uploaded their renders yet though ): https://www.facebook.com/daruma.productions/photos/pb.826212510823193.-2207520000.1456498240./895103633934080/?type=3&theater there's probably more, but I'm sadly to lazy to keep googling anyway, some new stuff today I want to share with you, few more renders from the past, and from now on I'll be sharing only new stuff. Enjoy:

02-25-16

8

8

4

thread gallery
16 Favorites and 12Followers.
Nemesis Art Studio (Bob's Sketchbook)
Hi everyone This is my first post here, so I guess I'll introduce myself shortly. My name is Bartlomiej Plociennik but everybody calls me Bob, I'm 21, I started my hobby which is sculpting miniatures in a traditional way when I was about 12 / 13 yers old, so almost ten years ago, then I started taking comissions for it and it all became more than just a hobby. Over a year ago I got to conclusion that traditional sculpting has no real future in this industry, because digital modeling is much faster (sometimes even as much as five times) and more precise, and 3D printing technology is at the stage now, when we can print highly detailed 30mm model with almost no flaws whatsoever. So I started learning Zbrush, I established my own company Nemesis Art Studio, I signed contract with Prodos Games few months back and now here I am, sharing some of my works. Of course I cannot show you them all, there is way too much, but from now on I will post here everything they let me at Prodos, and with no doubt I'll throw something of my personal projects from time to time. And if you want to dig in my past a little and see more of my miniatures both sculpted in Zbrush, and some in clay, feel free to check out my fb page: https://www.facebook.com/NmsisArt/ Back to the topic, here are some of my previous works:

  • ROXE
    02-26-16
    you make a good sculpt!! The fur on to a bear it's amazing!
  • Totyo
    02-26-16
    Very good work, do you have some photos of the final models (3D printed/painted?)
02-25-16

7

0

0

thread gallery
16 Favorites and 12Followers.
And another few miniatures' renders, feel free to comment, critique also is welcome