ZScript: ZFabric16 works with Z2 (pag.5)

[cameyo]

Hi all,
i am writing a zscript to do fabric texture...
I'll publish (i hope) the final version after the Z2 will be out (maybe there will be some new zscript statements :eek :).
Here is some wip...
Thank you for viewing.
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079610945cbu.jpg

cameyo

[EDIT]
New script at pag. 5...

[andreseloy]

Hi Cameyo as always a great helper of the forum¡¡¡
Thanks in advance¡¡
It will be nice too if could add bump maps¡
Thanks very much
Andreseloy

[billhdz]

That sounds great!

Thanks cameyo !!!

-billhdz

[50'sKID]

That should get alot of use. Thanks. 50.

[SpriteD]

Oh Wow Wow, This would be a wonderful script addition. Can hardly wait. Thanks in advance for this new additional script and for all your past efforts. :)

[Fouad B.]

hummm.. very interesting... when ???

[Aztec...soljA]

Big step Cameyo we all need that special touch on clothing and other stuff thx a lot !

[filip]

Cool! I have been looking for something like that. Might need it in the next 2 months, hope you'll post it before that for my last children book.
Thanks!

[upham]

Hi Cameyo
Make this ZScript please! :tu: :tu:

HERE's (http://www.andras.net/alltextures/foodfabric0002.html)a page I found last night that has several pages of free fabric textures.
Upham :)

[bicc39]

Many thanks for your continued efforts on our behalf.

[Frenchy Pilou]

A challenger for you
1200 free textures :) (http://www.vocanson.com/tm/D/D1_textures_num/d1_menu.htm)
Pilou

[Aztec...soljA]

Here I tried some of the textures from the source u gave cameyo.
:b3: The material makes it look like real clothing. http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079644911mqi.jpg

[zerobio]

Hey Aztec, how did you DO THAT?!

Incredible. Did you model a sphere with the material/texture indicated and just move/draw to get that shape? Or does it have something to do with Cameyo's script?

That looks really good.

zero :)

[billhdz]

<BLOCKQUOTE>quote:</font><HR>
A challenger for you
1200 free textures (http://www.vocanson.com/tm/D/D1_textures_num/d1_menu.htm)
Pilou <HR></BLOCKQUOTE>

Thanks Pilou.

Are these textures free for commercial use?

-billhdz

[wenna]

Looks like you did it again, Cameyo!! Thanks so much! Can't wait to get my hands on this one!

[andreseloy]

Hi Aztec beutiful¡¡¡
Great¡¡
Andreseloy

[Aztec...soljA]

no u mean the shrit??? well here I used those sphere-thingies, also I used the material with ... oh here its better with this pic. :p http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079659991bfr.jpg

[boozy floozie]

This looks like another fantastic addition Cameyo. :tu:

[cameyo]

Hi all,
thank you all...
Actually i have some problem to scan the canvas...it's slow...but i'll work around to find a solution.
The script will be out after Z2...or the delphi program...i don't known....fast...fast
I can't wait 5 min to draw a complete canvas...

cameyo

[souleat]

thank you cameo! we need a lot of scripts.. :D

[Frenchy Pilou]

Hi Bill
No sorry In this site, It's for personal use ! You must buy it for a professional using !
Pilou

[Frenchy Pilou]

Hi Aztec
You have not given the good member, It's Upham and not Cameyo who give the link of your beautiful pull over texture :)
Pilou

[andreseloy]

Thanks for the tutorial Aztec¡¡¡
Congratulations friend¡¡
Andreseloy

[JUSTNPROUD]

In the texture panel in the reference pic. Whats the grd for next to colorize? Also wonderfully done. how do you get such a high definition image.ive been using texture master , but i cant get that "real' look/

[Aztec...soljA]

Pilou- u r right am sorry,I truly apologize. SSorry upham.
Andre- Gracias amigo siempre puedo contar contigo... Thx a lot!
JUSTNPROUD- I didn't use texture master, u just get the texture and get your tool, click on your texture u want to aply, then...
under the texture panel choose the mode it will best fit your tool and also arrange the H and V repeat to make it look like there is more in one :D
About the "GRD" definition: The gradient colors button displays the colors of a colorized mesh with softened edges.
Hope this helps :)

[Aztec...soljA]

oh one important thing is the material hope Cameyo put some in there, I would really enjoy that script... here is the material I used to make it look as if clothing. ropa.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1079759662zeq.zip) hope it works

[cameyo]

Hi all,
i have a wip to test ...
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079800835rir.jpg
The image show the interface and four texture examples.
Download:
ZFabric3.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1079800743uql.zip)
Some info:
The script draws horizontal and vertical lines...
You can choose colors and number of lines.
If a color switch is OFF then that color is skipped, but the relative number of lines will be counted.
Press the "Default" button before drawing !!
Sorry for poor explnation...but i must go out with my daughter.

Please test it and post result.

Ideas and suggestion are well accepted... :)
See you later...

cameyo

[Frenchy Pilou]

http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079806146usj.jpg
(Just a Cameyo's texture apply on some spheres 3D :)
Hi Cameyo
Just 3 suggestions :)
:b3: A function who copy in one pass all the colors selected from vertical to the horizontal for have a symetry color texture :)
:b3: A function random for each color in the squares
:b3: And maybe the cross Cursor who choose color (when you press it)from texture to the palette(or canvas)when you release it (I don't know if it's possible :)
(now we are oblige to chosse on the palette and goback : I Am some lazzy :D
Have funny scripting!
Pilou
Ps And a last one :rolleyes:
:b3: Why not the possibility to put in each square a texture or a piece of "surface's canvas" grabbed?
(of course is not the same "line building" but I think that should be not difficult to realize :)
Fractal isn't it ?

Pss Maybe a bug :D When you put the number "zero" = 0 :rolleyes: in all square it's seems that the process don't stop ! A false test ?
:ex: so numbers >=1 :)

[matvara]

Thanks Cameyo for yet another powerfull and
very useful script. Maybe you could write
some plugins for upcoming Z2 someday! :tu:

Aztec...soljA, That was a great methode to
make clothes, thanks a lot! :tu:

[KingSalami]

Thanks Cameyo:

1) reset colors option
2) have script select tool and size

http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079838711oip.jpg

[cameyo]

Hi all,
you can do better textures... :)
Try again.

I have developed a new version:
- Add Random Colors
- Add Reset Colors
- Add Swap Colors
- remove the Frenchy bug :)
Download:
ZFabric5.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1079865963xfv.zip)
Future enhancements:
- add apply material function
- add palette color creation
- add help and demos
- add save and restore colors and parameters(after Z2...)

Tip:
after the creation of a texture try to paint different material on canvas to obtain marvelous result.

cameyo

p.s i'll explain better this scripton monday

[Frenchy Pilou]

http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079877659dbd.jpg
Hi Cameyo
I see that my suggestions are already made :cool: Bravo !
One more :)
You copy all colors Vertical to Horizontal ok !
But not the Numbers ! Is it possible ? :)
(yes two buttons more :D
Have fun scripting!
Pilou

[Gary Komar]

cameyo,
your scripting rocks this will surely come in handy,thanks :tu: :)

[cameyo]

Hi all,
a new version:
- add two Palettes
- add resize canvas to pattern dimension
- add copy repetition values
- add apply material function
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079939425krf.jpg
Download:
ZFabric8.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1079939475uep.zip)
I have seen few textures from users..maybe this little tutorial will helps.
The scripts write horiz and vert lines on the canvas.
You can choose colors and number of repetition lines.
The lines are one pixel width. You can change Stroke->Spacing to vary from continue to dotted line.
If a color switch is OFF then that color is skipped, but the relative number of lines will be counted.
Press the "Default" button before drawing !!
Example:
1) Load script and press the "Default" button to set the standard drawing parameters.
2) Press vertical "Random" to create random palette color
3) Write the following Repeat Value for vertical palette: 2-4-4-2-4-4-2-4
4) Press "VPAINT"
5) Now Prees "VCol->HCol" button to copy colors from vertical palette vertical to horizontal palette.
6) Write the following Repeat Value for horizontal palette: 2-2-2-2-2-2-2-2
7) Toggle settings: H1=ON, H2=OFF, H3=ON, H4=OFF, H5=ON, H6=OFF, H7=ON, H8=OFF
8) Create new layer (you can erase the layer if you don't like textures :))
9) Press "HPAINT"
10) Now Press MATERIAL button and select a material...
11) ... if you don't like the material selected...press "X" (the shortcut of "Material" button) and select another material.

More, the textures created are seamless and the script works with any canvas dimension.
I think this is a powerful texture creator...but i'd like to see your works.
Please, try it and post result.

cameyo

p.s. maybe this version had some bugs...work on the night...

[Frenchy Pilou]

http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1079949372vdj.jpg
Hi Cameyo
The "help" of Hcopy is false (repetition of the same word) :)
Suggestion : A button for an automatic grabb of the entiere Canvas ? (easy)
(for make Alpha or texture)
Have happy continue scripting!
Pilou

[cameyo]

Hi Pilou,
i had more rensponse before add zscript....
Maybe it's not so good as i was thinking...
But i wish only a 121 from users.

Thank you

cameyo

[Frenchy Pilou]

Hi Cameyo
No, No It's a good idea !
But now all people are waiting the next release of Zb2 !
It's the "stase" before the "extasy" :D
Pilou

[andreseloy]

Cameyo do what you feel, dont guide by the user response. I post many images here because i enjoy working with ZB and few people reply or see my post (i appreciated very much) but i dont stop to post or to work with ZB.
Is easy to see that some user dont want or dont like what you do (they reply other post at the same time say nothing to your post).
Just do what comes from your heart not from ego.
Keep on friend¡¡¡
Andreseloy
ps:your script (all) are very helpful and has been an inspiration source to other zscript programmer too¡ I want to learn script, i suggest you to make an special topic (excuse my english) about learning and making script, i have reading in ZB2 that the new version allow plugin, it will be an interesting window to learn and there you have a very important function too.
(excuse me by my english i dont feel confortable when i speak in coloquial way).

[cameyo]

Thank you, Andreseloy,
i'm not guided from user response...you can see this from all my posts (from 2001). What amaze me is the fact i have already told: before adding zscript there was much more audience...when the script is on-line...they grabbed only. It's not a problem for me, but it's so.
I like a lot your images, but...i post few times on your works.

cameyo

[andreseloy]

Thats right friend¡¡¡
Keep on¡¡
Andreseloy

[Polaris30]

I am going to take a moment to say thanks :)

This is very nice of you cameyo :)

Thankyou for this Zscript and all of your other ones also :)

It is very nice that you take time to make thease things for all of us...

I am going to download and try this Zscript :) I realy need to make fabric , and this Zscript looks like it is going to make it easy for me :)

Thanks again Cameyo :)

[Fouad B.]

Cameyo, I'm little busy these days, but I follow this thread with attention.

I'm waiting to finish my project to test your interresting script.

don't worry your tools are as usually very usefull.

Friendly :)

[Ron Harris]

thankyou Cameyo :tu:

[kokoro]

cameyo, i too want thank you for your scripting efforts ... your zplace is only non-default script i have added in my zbrush, and i do use it a lot, if only for reason its so easyy to make mm-tools with it ... unfortunuately, i have not time yet trying out your new texture script, but the idea alone is wonderful, and it does already look great, and i do look forward to when i will have time for that ... just to let you know, your work is much appreciated :tu:

[bicc39]

I wish to echo the sentiments of Andresloy and add again my thanks for your help.
Know that there are people here who appreciate your efforts and the generous thoughts behind them.

[matvara]

Thanks a lot Cameyo for the update! I was kind
of hoping you'd add seamless feature, it's
absolutely great and I can't wait to try it
out. I do mostly characters and being able to
give them proper clothing is very essential.
Your codes rock!!!
:tu:

[johnny blaze]

Good script Cameyo. I will be sharing a new script that will totally alter the way we color our images. I am waiting til after the release of Z2 to pile on the ectasy of the new altered workflow of the Zuser base.

[filip]

Thanks cameyo, your picture look worn out, working too hard.

:D

Don't have much sleep myself.

Excuse me please, how to you use Zfabric?
Any tutorial? or steps?
Thank you.

I got it !! :tu: :D

[cameyo]

Hi all,
thank you for your posts.
There are some bugs in the ZFabric8 file...but i have catched it.
New version on the way...
- Save and Load parameters palette
- More method to do Palette (Inverse, Complementar,ecc.)
- ecc.

Aztec...solja: thank you for tutorial and material

Andreseloy: please to meet you (i have seen your photo....)

Gary Komar: where are you going? (Thank you) Your experiment on Zposing ?

Polaris30: thank you for your words

Ron Harris: How are you? I'm very glad to hear you again.

Filip: i have already post a step by step to start...but i'll do help and examples. And i'll like to see your children book.

Johnny Blaze: warning: after Z2 the old scripts must change...I hope you post the source too.

Kokoro: can you post the link of your new site...i had hear it's very good.

Matvara: nice words and fresh air for the forum...

Fouad B.: I'm honorated if you will use my script.

bicc39: keep on ... you are great

Upham: i hope you like it.

Wenna: Best regards

I hope do not forget no one.

cameyo

[Frenchy Pilou]

Hi filip
Not realy difficult to use :)
Just follow the little lines taken by Cameyo above !
It's a very natural way :)
Pilou

[souleat]

oh i try also your script and have to thank you for your work!

[SpaceMan]

cameyo
I tried your ZScript - being new to ZBrush just before it rendered or drew I moved my tablet pen and it clicked a different alpha - the image I did not save but it had a crackle effect - looked cool- the effect was kinda like pebbles but flat on top.
Thanks for making the zscript
SpaceMan

[kokoro]

hihi, cameyo, then you are the very first who heard on my new site ;) ... my new site is still in works, its lots what i want do there, show paintings, tutorials and ... :) ...and i will announce it here at zbc when finished ...
i think you have heard of stonecutters new site, which i programmed according to his ideas, and yes this is a great site ... here is the linkdragon tears (http://personalpages.lightspeed.ca/~stonecutter/HomePage%20VER7/homepagevers07/dragontears.htm)

[Frenchy Pilou]

Hi Cameyo
Yes one is forgotten ! Me :D
Have fun :cool:
Pilou

[DaveG]

Hi Cameyo,

Many thanks for your script :tu: - I am busy trying it out now and will post a result as soon as I am able to.

Go well! :)

[matvara]

Hi Cameyo;
I had some quality time playing with your
fabulous script. It can also be used to make
textures and that's a good thing. Then I got
some crazy ideas and I wanted to know what you
think about it.
These four textures was done with Bump-brush,
and I used both add and cut functions here on
different directions. (add vertically, and cut
horisontally, all separate settings.)
The only drawback was that I had to grab the
screen to save it as a texture, which made them
no longer seamless.
Any idea?
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1080087854dzz.jpg

I also used a material with color bump value.

[Frenchy Pilou]

You have the method by Pixo inside the Show and Tell of Texture Master (the apple making)
At the end Pixo show how make texture without seam and tilable :)
Pilou

[Aztec...soljA]

No, thank you Cameyo, this will save us lots of time and its just a good script, personally I was wating for a script like this, Thanks again have a great day!

[cameyo]

Hi all,
Matvara, wonderful texture...the script can do seamless texture, but the user must follow some rules. One of these is: the canvas must be a multiple of vertical and horizontal pattern. Another: the material sometimes destroy seam.
Anyway, here is a new version:
ZFabric12.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1080111135fvx.zip)
New interface:
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1080111271zmv.jpg
Info and help....the next day.
The next version will have some of Z2 twist and bells...only one week to Z2 :)

Pilou: sorry...my mind remember only your stars... :) :) :)

cameyo

[andreseloy]

Cameyo this is a great script and very helpful¡¡
This is an exercise with it¡
Thanks
Andreseloy http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1080158113nrq.gif

[SpriteD]

I love this script, I mean I love it. Having to play with the buttons, but know as you said the txt tut will be coming with Z2. Again, just think this is the neatest of neat scripts. Mucho Gracias :tu: :tu: :tu:

[cameyo]

Thank you all.
After Z2 the new version of this script will have 16 colors...help...tutorials...examples...

-6.....

cameyo

[Kitty]

Cameyo, I have to thank you so very very much!!!!

I have been struggling with fabrics, and here you have a wonderful script. I am going to wait for Z2 script since I just found out about this thru another thread. And Z2 is now just a few days away :)

To finally be able to get real looking material, HEAVEN !!!!

Thank you so very much

Mandy

[cameyo]

...16 colors with zb155b...
Interface:
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1080486101zbx.jpg
Download:
_ZFabric16.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1080486166mjm.zip)

...you can do (almost) any fabric texture...

I hope this will work with Z2 with small changes...(Aurick? :))

Please, post your textures.

cameyo

[andreseloy]

Thanks Cameyo¡¡¡
Andreseloy

[filip]

Thank you so much cameyo!

I am sure my last children book will make the best use of this fabric texture. The book will start end of April and expect to complete in two months part-time.
Will post some work by then.

[matvara]

Great update Cameyo, more colors to use. Is it
possible to add a small function to copy line
width as well as colors by clicking Vcol<>Hcol?
Your codes rock!!!
:tu:

[Frenchy Pilou]

Hi matvara
This exist : it's the Button Copy :)

Hi Cameyo
A button who fill all Widths of a line with a same Number Enter by the User ?
Thx by Advance :)
Pilou

[SpriteD]

I love this script but have a few questions.
What screen size do you use so all the colors are on the same line.
To choose a color do you click on the color button and give it a value?
how do you get vertical and horizontal lines in the same texture.
Thanking U in advance,
Ops also is there going to be a txt tut any time soon? I am a slow learner. :)

[Frenchy Pilou]

Hi Sprite
For choose a color :click to the Menu/ Color/palette and just click on a color fabric square :)
For make Horizontal and vertical visible you must "disable" some colors in the "up" (H&V) else you will see just vertical or Horizontal lines :)
Pilou

[Bonecradle]

Another great zscript Cameyo - thanks for putting in the time to produce it.

I've just had a chance to start experimenting and I'm having some problems with it though, notably the way it is drawing the lines at an increasing angle across or down the page. Have I got an odd setting somewhere that is causing this? I also can't figure out how to get the lines to reach the edge of the canvas. I am using a default 640x480 res with X2 set to 640 and Y2 set to 480. I'm using the latest version (16.zip).

PS: I tried version 12 and the same problem happens so I guess the cause is my end.

[Kitty]

Cameyo, I can tell this HAS to be a great script, but still going to wait until after Z2 is launched, cuz as you said (Lordy) there may be some script coding changes.

And, knowing me, I cannot keep my mouth shut LOL .... so here goes.

When a script is written, you know it is good, cuz everyone wants a "better" version.

But I am here to tell you nice people, as a retired programmer, but not as high up as Cameyo, that every change that is made to a script (program), in many ways makes it so the script is not as good as the original. That is because all your "suggestions" interact with the other code, and it will cause problems that later you all are going to have to live with.

So please, let Cameyo have his space for his artistic abilities with scripts, you all know he has heard you yelling MORE MORE MORE, and he knows you have done that because you love his script, but do the guy a favor, and dont wear him down to the bone LOL.

To be blunt, don't be vultures who want everything, and pick all the meat off the original script.

He said on page 3 or 4 that he only wanted a 121 ONLY LOL.

Wait, be patient, for Z2 to come out, and please let the guy breathe :D I am promising you, you let an artist at scripting have breathing room, you are going to get a lot more then even you can think of, cuz there is no better critique then the artist themselves.

so wait for Z2 to come out, and quit asking for MORE MORE and still MORE.

Lord, this is one of the reasons I will never program a script for anyone, cuz you cannot please EVERYONE LOL.

Cameyo, take a breather, dont think (or try not to think) about this script until you want to AFTER Z2 release. And if it stops being fun, then take a long breather :D

Rest of us will stop being vultures, wont we my friends :D

Forever a big mouth

Mandy :D

[cameyo]

Thank you all.
Bonecradle, sorry i don't understand your problem...Can you explain your steps to reproduce the error ?
Try this:
1.load the script
2.press 'default' button
3.press 'vpaint' button
4.press 'hpaint' button

Kitty...you known me...some relax days...until Z2.

Pilou...you known my script better than me :)

cameyo

[aminuts]

Cameyo...love this script....specially being able to add a material.

a small sample:
http://www2.zbrushcentral.com/uploaded_from_zbc/200403/user_image-1080542205ytx.jpg

sorry for the quality and size but couldn't get it to pass the 200k limit otherwise.

[Bonecradle]

Hi Cameyo

I figured the problem out - all I need to do is set Preferences>Draw>Mouse averaging to 1 and it works fine now. Increasing Mouse averaging causes the angle to get increasingly worse across the page.

Now I can play :)

[Bonecradle]

Wow, how's this for an eye-bender :)

HINT: you can use any brush that can apply RGB colour with this zscript. The glow brush is great for blending gradients if you use slightly different brush sizes from the first run.

Possibilities seem endless.

Oh, this was done with the fibre brush :)
Unfortunately it has lost some of its optical depth with the jpeg compression - the original looks like one of those 3D optical illusions.

[Frenchy Pilou]

Hi Bone
Of course you can use any brushes, and any Zadd sub, cut, and intensity rgb, and material and variated size etc
Even 3D object !!!
It's a very funny prog :cool:
Cameyo rocks one more time :)
Pilou

[50'sKID]

This is a great piece of work, cameyo. 50.

[froyd]

this is a great idea and a great script!
I love the textures matvara made with it.
:tu: :tu:
Well done, cameyo!

greetings!

[Stargo]

Thank you for the great script, cameyo :tu: :tu: :tu:

Stargo

[cameyo]

Works fine with Z2....until now....

cameyo

[Frenchy Pilou]

Happy for you :cool:
Pilou
Ps A button who fill a same number in the same line? :) (easy ;)

[cameyo]

Here is two demo script to show how works ZFabric...Demo01.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1081259004gpd.zip)
Demo02.zip (http://www2.zbrushcentral.com/uploaded_from_zbc/200404/user_file-1081259019cgb.zip)
The first contains some notes.
The second show how to use Stencil with ZFabric (but without notes).
Hope this helps.
I'm working on a new version of ZFabric with LineII Stroke type, Different size of lines, ecc. (the button Pilou request...)


cameyo

[matvara]

Looking forward for the updates Cameyo! You'e
the man!!! ;)

Thanks froyd, I was aming at some thicker
material to texture interior elements like
sofa, drapes and so. I had to put some extra
efforts to make them seemless again, but it
was worth it. :b2:

[aminuts]

sigh, a great script lost in the jungle, ran across it and thought it good to revive.

[triztan]

i have seen your script 2 months ago and since then i searched this forum but had no luck. now i just have found out the search word "fabric". i am swiss-german speaking so i have searched before for "cloth", "Pattern generator" and so on.

lucky that i have found your great script again. this script rulez.

keep on coding such great stuff,
daniel

[Frenchy Pilou]

And why not ask your research on the forum? :D
In five minutes somebody found your wish :cool:
Pilou

[Elvetree]

This script for Zbrush is a excellent. I do alot of texturing by hand for Poser 5 clothes. So I hope this will help with the speed of doing them.

[marcus_civis]

What a great script! Thank you, now we can make carpet! :) http://www2.zbrushcentral.com/uploaded_from_zbc/200407/user_image-1089309325war.jpg

[Frenchy Pilou]

Spheric 3D carpet indeed :D
Pilou

[motolov]

thanks alot ill give it a try a little later keep up the ggod work
and stay posotive

[Cresus_Digit]

After doing VPAINT and HPAINT, I saw paint on background and my object.
But I can't have control of my object.
My object seems to be freeze.
Something is missing:
I have seen few textures from users..maybe this little tutorial will helps.
The scripts write horiz and vert lines on the canvas.
You can choose colors and number of repetition lines.
The lines are one pixel width. You can change Stroke->Spacing to vary from continue to dotted line.
If a color switch is OFF then that color is skipped, but the relative number of lines will be counted.
Press the "Default" button before drawing !!
Example:
1) Load script and press the "Default" button to set the standard drawing parameters.
2) Press vertical "Random" to create random palette color
3) Write the following Repeat Value for vertical palette: 2-4-4-2-4-4-2-4
4) Press "VPAINT"
5) Now Prees "VCol->HCol" button to copy colors from vertical palette vertical to horizontal palette.
6) Write the following Repeat Value for horizontal palette: 2-2-2-2-2-2-2-2
7) Toggle settings: H1=ON, H2=OFF, H3=ON, H4=OFF, H5=ON, H6=OFF, H7=ON, H8=OFF
8) Create new layer (you can erase the layer if you don't like textures )
9) Press "HPAINT"
10) Now Press MATERIAL button and select a material...
11) ... if you don't like the material selected...press "X" (the shortcut of "Material" button) and select another material.

How can I rotate and move my object at this point ?

Cresus_Digit

[jesusguijarro]

Does Fabricworks with Zbrush 3.1?

[Cresus_Digit]

I dont think so.
I tworks with Zbrush 2.0

[jesusguijarro]

Thanks, any update planned, I only have Zbrus 3.1 and think fabric is an usefull pluggin

[cameyo]

I will work on it in the weekend...
I will upgrade it toZ3.1

Have a nice day

cameyo

[jesusguijarro]

Great news thanks. :tu:

[Dansh]

is all i wanted to have a magic script to design me own stocking.
mille gracie,thanks.

[ByteDreams]

Hi there. I'm still a beginner with ZBrush, and am now looking into texturing and painting with it. This script sounds interesting and I wanted to know if there was an update for 3.1 as mentioned in this old thread.

[3dassets]

Any progress with this utility? Does it work with current version?