Free models for ecorche and anatomy study

[hummel1dane]

For the last half year or so I've been making this 3d copy of a plastic skeleton to use as an anatomy reference, I still need to finish the hands and feet but everything else is done. For now I've uploaded the skull and ribcage to filesonic, the rest will follow... Excellent for building digital ecorche! And did I mention completely free!!

The skull is divided into polygroups for all teeth and seperate jaw. The ribcage is also divided into polygroups for each pair of ribs breastbone and the pieces of the spinal column. You can use the splitgroup under the subtoolmenu to split the polygroups into subtools, that way you could merge the lowerteeth to the jaw and upperteeth to the skull, making the jaw movable.

Filesonic link for skull - skull (http://www.filesonic.com/file/986793934)
Filesonic link for ribcage - Ribcage (http://www.filesonic.com/file/988912734)

EDIT : Bas Mazur made a retopology of the skull, cut down the number of polygons in cranium and jaw, should be easier to work with. Note that the teeth in this model have higher polygone count and are all one polygroup.
http://basmazur.nl/upload/SkullRetop.zip

The rest of the skeleton will follow...

skullGI.jpg skullgroups.jpg ribcagegi.jpg ribcagegroups.jpg

[Nancyan]

Thanks hummel1dane, very generous of you to share this.

[monstermaker]

Yes, very generous of you .Thanks you

[rodrigo23]

thanks alot for sharong!!!!!!

[MassFX]

Thanks hummel1dane (http://pixolator.com/member.php?u=184717) this will come in handy someday!

[MassFX]

I printed your Skull out and thought you might like to see it. Great Job. I printed this just as a test for the printer.Skull front.jpg Skull w Jaw.jpg

[Bas Mazur]

Thanks, nice!!

[Totyo]

MassFX: I sent you a private message :)

[hummel1dane]

MassFX - WOW! That is awesome! And so small, I don't understand how it's possible, 3d printers are still sci-fi in my universe.

I'm really glad you guys like this, I'll be uploading a lot more in the future.
Here are the shoulderblades and clavicles that goes with the model, in two different subtools.
Filesonic link : Shoulderblades and Clavicles (http://www.filesonic.com/file/1034145144)
shouldbladeclavicl.jpg

[Rusti]

Amazing, thanks so much for sharing this great stuff!

[hummel1dane]

Rusti - your welcome!

Model of the pelvis, the topology got a bit messed up, I accidently made it hollow in the sides, also it's very bumpy the way it is now. Could do with a make-over, but for reference it should be ok.
An important thing to mention, I attempted to make this a guys pelvis, but the plastic model I used as reference was from a girl, so there might be some anatomical inaccuracies. I did use images from anatomical books to adjust it, but I'm not sure how succesful I was.

It is complete with ligaments, divided into different polygroups - the ligaments are important because that's where some muscles attach.

Filesonic link : Pelvis (http://www.filesonic.com/file/1050431364)

Pelvis_complete.jpg Pelvis_polygroup.jpg

[Bas Mazur]

Looks great again! Did you scan the plastic model (because of the strange topology)? I made a new topology for the skull with ZB, hell of a job :-P
Maybe I do the other parts too when I have 3D coat.

[hummel1dane]

Thanks Bas Mazur, I build all the models from zsketch, but accidently made a part of the pelvis hollow, problem is I don't really know how much is hollow, I had to turn backfacemasking on and off all the time while sculpting, there might still be some places where the inside crosses the outside due to backfacemasking turned on.
The skull was made with zsketch, but I did a remesh at one point that changed the topology a lot, I think the cranium part is still hollow as it was in the beginning but I'm not sure.
I'm not that good with topology so it would be cool if you'd improve it. I just wonder if you could upload the new versions somewhere? It would be really cool!!

[Bas Mazur]

It's not the best topology but a good one to work with. I also opened the holes of the nose.

http://basmazur.nl/upload/SkullRetop.zip

[hummel1dane]

Bas Mazur - Thanks that's awesome! Easier to transform and fewer polygons :D

This is the thyroid bone with the adam's apple attached. I won't do the windpipe, I don't think it becomes visible enough. This is a males adam's apple(thyroidcartilage), 90* angle, women have about 120* angle

Filesonic link : Structures of the throat (http://www.filesonic.com/file/1054393411)
throat.jpg

[MassFX]

Great files and appreciate the work you put into them.I'm still a newb but hopefully will get to both of your levels of craftmanship!
Thanks

[MassFX]

Printed out your ribcage & shoulder blades. Gave the skull an expression, attached verterbrae with a support and attached shoulder blades to ribs.
positioned skeleton recaled.jpgpositioned skeleton side recaled.jpgpositioned skeleton back rescaled.jpg

[mikala]

Loving this!
Seeing it come to life in the real world is also quite a kick!

[m0delista]

Incredible Quality !

[kyphur]

Pretty cool of you to offer the files for free. The 3D prints look cool also.

[hummel1dane]

Filesonic link for bones of leg : Bones of the leg (http://www.filesonic.com/file/1068063534)
Filesonic link for structures of the nose : Structures of the nose (http://www.filesonic.com/file/1068103604)


MassFX : That is awesome! I think everybody in these forums would envy your 3d scanner, I wonder how much a print costs?
Btw I also do a tutorial thread about classical drawing in the old constructive style of the renaissance over at conceptart.org, if I have any skills in sculpting I'm sure it's partly a result of a good understanding of classical drawing, I had the fortune to study a year in a school with a very good russian teacher. Here's the link to the thread -
http://conceptart.org/forums/showthread.php?t=178694

mikala : Really glad you like it!

m0delista : Thanks!

kyphur : U welcome.

Just finished the bones of the feet - hands should be done in some weeks, then I'll post a link for arms+hands.
The feet are divided into polygroups for the individual bones of toes and metatarsels - I created the other bones of the foot in two solid pieces, a bit simplified but I don't think it matters much.

legs1.jpg legs2.jpg

I also did this nose that fits the skull
nose.jpg

[moonlitmaverick]

Thanks for sharing. Much appreciated. I think the link to the legs file is no longer working.

[hummel1dane]

moonlitmaverick - Glad you like it. The link works on my computer, I wonder what the problem could be?

[moonlitmaverick]

It is working fine, thanks again.

[hummel1dane]

All right finally done with the arms and hands. That means the model is finished! :D :D :D
I made the carpels of the hands in one piece, a bit simplified. Also the topology comes from zsketch so it's not that great to say the least, but I'm too busy to start retoping.
I will upload the complete model as soon as possible, cut down the filesonic waiting time. Btw if anybody knows any other server that could host these files?
I might not continue my filesonic account in the future.

Btw i suggest using "groupsplit" and "merge visible" in the subtool menu, as well as "autogroup" and "group Visible" in the polygroup menu to help moving it around.

Filesonic link : Arms and hands (http://www.filesonic.com/file/1145239124)

arms_finished.jpg
arms.jpg
hands.jpg

[mikala]

Thanks for this contribution to ZBC!
Very generous of you :)

[ExcutionArtist]

TY very much this could come handy to a new user with ZBrush.

[Anhslaught]

Thanks! I downloaded all of these. I'm going to use it for reference for my skeleton warrior. I'm going to stylize it based off your help. :)

[hummel1dane]

mikala - your welcome!

ExcutionArtist - Your welcome, good luck with zbrush.

Anhslaught - I'm glad you can use it, good luck with your project.

[hummel1dane]

Filesonic down, don't think that'll change. I'll work on finding an alternative, if you have a suggestion please let me know. If you already have the files you can upload them anywhere you want and drop a link.

Thank you!

[steve0077]

Any alternate yet?

[hummel1dane]

I'll wait a bit before I decide where to upload them next, the other filesharingsites might do like filesonic did.

If you desperately need those models right away just send me a message with your email and I can send the files I got.

[hummel1dane]

I've decided to upload to fileserve this time.

Unfortunately I can't find the exact files, but these should be more or less complete.

For the ribcage :
File name: Ribcage_done!.ZTL File size: 6.48 MB (http://www.fileserve.com/file/znSvrrt/Ribcage_done!.ZTL)

For the skull :
File name: Skull_Finished_2.ZTL File size: 7.46 MB (http://www.fileserve.com/file/gkCdPg2/Skull_Finished_2.ZTL)

For the feet/legs :
File name: feet_22.ZTL File size: 9.53 MB (http://www.fileserve.com/file/CbDFPkk/feet_22.ZTL)

For the pelvis :
File name: Pelvis-complete.ZTL File size: 12.78 MB (http://www.fileserve.com/file/tmuwQqq/Pelvis-complete.ZTL)

This file should contain the arms, maybe the whole body.
File name: ecorchenew_finished.ZTL File size: 47.88 MB (http://www.fileserve.com/file/UB2NF7s/ecorchenew_finished.ZTL)

Btw I don't have zbrush installed atm. so this is the best I can do.

[spm151083]

thanks a lot for link, they are really good.

[mdg3d]

Thank you very much for sharing this resource.

[Altea]

These links don't work any more because the change of policy of fileserve. Any chance to upload to any service that allows it?

thanks


I've decided to upload to fileserve this time.

Unfortunately I can't find the exact files, but these should be more or less complete.

For the ribcage :
File name: Ribcage_done!.ZTL File size: 6.48 MB (http://www.fileserve.com/file/znSvrrt/Ribcage_done!.ZTL)

For the skull :
File name: Skull_Finished_2.ZTL File size: 7.46 MB (http://www.fileserve.com/file/gkCdPg2/Skull_Finished_2.ZTL)

For the feet/legs :
File name: feet_22.ZTL File size: 9.53 MB (http://www.fileserve.com/file/CbDFPkk/feet_22.ZTL)

For the pelvis :
File name: Pelvis-complete.ZTL File size: 12.78 MB (http://www.fileserve.com/file/tmuwQqq/Pelvis-complete.ZTL)

This file should contain the arms, maybe the whole body.
File name: ecorchenew_finished.ZTL File size: 47.88 MB (http://www.fileserve.com/file/UB2NF7s/ecorchenew_finished.ZTL)

Btw I don't have zbrush installed atm. so this is the best I can do.

[tocante]

gracias...gracias...gracias

[hummel1dane]

This link should work.

https://rapidshare.com/#!download|742p2|3990989865|ecorchenew_finished.ZT L|50203|R~72BC3E72256FCED701C3A643B2498487|0|0